Veris-technologies Quad 1000 Soil EC Mapping System - Operating Instr Manual de usuario descargar pdf (Pagina 24)

OM17-Quad1000

6-3

Figure 2.2

Firmly press one lead of the ohmmeter to the #1 disk blade edge (left hand, standing behind the

unit) and the other lead to the terminal marked #1on the Quad 1000 test box decal. Maintain firm

pressure on the ohmmeter lead touching the disk blade. A reading of less than 2 ohms is normal.

Rotate blade ¼ of a turn back and forth as you view the ohmmeter. Any jump in the readings

above 2 ohms indicates a problem. (Figure 2.3)

Figure 2.3 Testing signal continuity on Quad 1000 #1 disk.

Continue to check each disk electrode in succession, left to right.

If any disk electrode exhibits no continuity or resistance higher than 2 ohms, refer to Procedure #3

Diagnosing EC Signal Problems.

Connect other lead

to disk blade

Ohmmeter

Connect one lead to Signal Test

Box terminal corresponding to

disk blade

Signal extension cable

(from implement)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 42 43

Sin comentarios

Veris-technologies Quad 1000 Soil EC Mapping System - Operating Instr Manual de usuario Pagina 24